Trouble Checks - RCA F25215 User Manual

References
Trouble Checks
You may have problems that can be fixed with a few minor adjustments.
Look for the type of problem you are having below and then try the
suggestions to get your TV going again. For warranty information see page 19.
Trouble
Checks andAdjustments
Power
TV will not turn on
No picture, no sound but
TV has power
f
Plug TV in.
Plug something else into the outlet to make sure it is working.
Make sure batteries in the remote are not dead.
Aim the remote at the TV and press POWER.
Makesure batteries are placed in the remote the right way. See batteries
on page 2.
Unplug TV for a few minutes and then turn it on again.
Check antenna connections.
Check position of Cable/Air feature. See page 14.
Try another channel. Inactive channel may be tuned.
Make sure TV is tuned to the same channel as the switch on back of VCR
if watching a VC1L
Make sure TV/VCR button on VCR is in correct position when using VCR.
Picture
Blank screen or Unusable
Signal appears on screen
Picture poor, sound okay
Sound
Noisy stereo reception
Picture okay, no sound
Picture okay, sound poor
No stereo on stereo station
Try another channel. Inactive channel may be tuned.
Scan the channels.
Check antenna connections.
Adjust TV picture. See pages 7-8.
Turn Stereo off. The stereo broadcast may not be dear. See page 9.
Press VOLUME -!- or MUTE to restore sound.
Try another channel.
Try adjusting the Stereo or Tone. See page 9.
Change Stereo to off. The stereo broadcast may not be clear. See page 9.
J
Make sure Stereo is turned on. See page 9.
• , • , ,
17