Table of Contents
Advertisement
Using Advanced Features .-
,Placing Channels in Memory(Autoprogramming)
Only channels 2-13 appear in the TV's memory, when you first turn it On.
The channels available;in your area must be programmed
into the TV's
memory when you hook up your TV. Using CHANNEL up and down
aUows y ou
to scan through these channels.
You may want to add or delete a few channels
if some stations have weak
signals or were off the air when the TV was programmed.
Refer to the Add
or Delete Channels section below.
1"-
Place
channels
in
memory
(Autoprogram)
131
A. Hook up an antenna,
cable or
components
before you begin
these steps or you will not be
able to add channels
into
memory.
B. Press MENUopROG repeatedly
to select the Setup Menu and
highlight Autoprogram.
This
menu is white.
C. Press MOVE • to highlight
Autoprogram.
D. Press MOVE • to start the TV
adding *allactive channels
into
memory.
E. Wait un(il the TV has cycled
through
all the channels
and
returns
to the original channel.
2. Add or delete
channels
3ontrols Alarm Ad
Controls Alarm Ad
131
13
A. Press MENUopROG repeatedly
to select the Setup menu. This
menu is white.
B. Press MOVE _' to highlight
Channel Memory.
C. Press MOVE • to underline
the-
channel number.
D. Select the channel number
you
want to add or .delete with the
number buttons.
E. Press MovE • to add or delete
a channel (you will see Stored
on the screen when added and
Erased when deleted),
F. Repeat D and E for more
channels.
19
Advertisement
Table of Contents
