Table of Contents
Advertisement
References
Trouble Checks
You may have problems that can be fixed with a few minor adjustments.
Look for the type of problem you are having below and then try the
suggestions
to get your TV going again. For warranty information see page 19.
Checks
and Adjustments
Trouble
Power
TV will not turn on
Plug TV in.
Plug something
else into the outlet to make sure it is working.
Make sure batteries in the remote are not dead.
Aim the remote at the TV and press POWER.
Make sure batteries are placed in the remote the right way. See batteries
on page 2.
Unplug TV for a few minutes and then turn it on again.
No picture, no sound but
TV has power
Check antenna connections.
Check position of Cable/Air
feature. See page 15.
Try another channel.
Inactive channel may be tuned.
Picture
Blank screen
Try another channel.
Inactive channel may be tuned.
Make sure cable or an antenna is connected to the TV correctly.
Picture poor, sound okay
Check antenna connections.
Adjust TV picture. See pages 8-9.
Remote
Works part or none of the
time
Clear the path between the remote and TV of any objects.
Make sure batteries in the remote are not dead.
See if batteries are placed in remote
correctly. See batteries, page 2.
Can't select certain channel
Press number buttons.
Channel may not be in memory.
See autoprogram
on page 11.
For numbers over 100, press and hold I until 1-- appears, then press the
other two numbers.
Set Cable/Air
feature to Cable for channels higher than 69. See page 15.
Advertisement
Table of Contents
