Pioneer PD-M403 Operating Instructions Manual page 14

i TO PLAY ONLY DESIRED TRACKS/DISCS
2
3
4
6
IIw
_ CZ3 CC3
2
I DELETE PROGRAM PLAYBACK - TO DELETE UNDESIRED TRACKS/DISCS (PD-M423 only)
1.With the player stopped, press the DELETE button,
so that the DELETE indicator lights.
- I
6
3
1,4
I
DELETE
DISC
DISC1 DISC2 DISC3
r---! r--I r---1
DISC NUMBER
DISC4 DISC5 DISC6
r---i r---1 r--1
TRACK/MANUAL
2. Use the DISC button or one of the DISC NUMBER
buttons to select the disc number.
The selected disc number will be displayed.
3. Then, press the 1,4<1_ or _ _ button to
select the track number.
The selected track number will be displayed.
4. Press the DELETE button, or wait two seconds;
the track to be deleted will be input.
If the DELETE button is pressed after selecting the disc
number only, the 'AL' indicator will appear, indicating se-
lection of the 'Disc All Delete' mode (the entire disc con-
tents will be deleted from the program memory). While
the 'AL' indicator is displayed, however, if the 1,4.4,_< or
_,-_ _1 button is used to designate a track number and the
DELETE button is then pressed (or after two seconds
elapses), the selected track will be deleted as that program
step.
5. Repeat steps 2, 3 and 4 to delete other tracks.
6. Press the I_/11 button.
All tracks other than deleted tracks/discs are played in the
order of the discs and track numbers. When tracks have
been played, the p!ayer enters stop mode.
NOTE:
When a track is selected with the I_ _ or _ _ button
in step 3, the displayed track No. is automa tically programmed
if the t<_ _ or JHb _1 button is not pressed within 2
seconds. Therefore, be sure to press the I_ ,_ or
JH_lbutton sequentially until the desired track No. appears on
the display.
DELETE
r--i
PLAY/PAUSE
F2
14
<PRB1205>
To stop Delete program playback, Press the •
button.
• Track No. 33 or above cannot be deleted.
• To go to the previous or next disc/track other than the
deleted disc/track, press the P<_ _ or DH_ _1 button.
• If the magazine is in the player, the delete program contents
will not be erased even if the power is turned off.
NOTE:
After programming for Program playback or during Program
playback mode, Delete programming can not be carried out.
To clear all of the Delete program contents:
@ During stop mode, press the • button.
® When the magazine is ejected, the program contents will
be cleared.
© Press the CLEAR button on the remote control unit during
stop mode or play mode. When the CLEAR button is
pressed during Delete program playback mode, the player
enters normal playback mode.