Connections - Pioneer LaserDisc CLD-D504 Operating Instructions Manual

CONNECTIONS
Connection with a TV set equipped with Video/Audio inputs
Connection method (Be sure to plug the cords securely deep into the connectors.)
Connect the VIDEO OUT jack of the player to the video input jack of an A/V TV (or a TV monitor).
• If the TVset has an S VIDEO input jack, connect it using an S VIDEO cable which is available in audio/video stores.
For use of the S VIDEO cable, also read the operating instructions of the TV,
Connect the AUDIO OUT ]acks of the player to the audio input ]acks of the A/V TV.
• If the audio of your TVis monaura!, connect the AUDIO (monaural) output jack of the player to the audio input jack of the TV.
Finally plug the power cord into a household power outlet (which should permanently be supplied with power).
• Also read the instruction manual of the TV.
........
O Check the p ositions
of the holes of the S _'_ Provided Audio cord Commercially-available
• _ VIDEO jack before _
I / audio cord
_._o_ inserti°n" 1 ,,,
¥
'
lu i
S VIDEO p g
....... ..........
I - _ck AUDIO input jack (mono TV)
m
Provided Video cord VIDEO input jack AUDIO input jacks (AN TV)
I Connection of an additional stereo amplifier I
This connection scheme shows how to connect the audio output to a stereo amplifier while the video output is connected to a TV using one of
the schemes shown above. To reproduce the audio of a Compact Disc or an LaserDisc with improved quality, it is recommended to connect
the player to a stereo amplifier.
Connect the AUDIO OUT jacks to the input jacks labeled LD, CD or AUX, etc. (Never connect to the PHONO input
jacks.)
• Also read the operating instructions of your stereo amplifier.
Plug into a wall
outlet after
completing all
connections,
Comme[c_a\l_/-
available
audio cord
8
<VRB1147>
Commercially-available mini-plug cord
_without _oad_
.'ONTROL OUT jack
(PIONEER stereo amp)
Stereo amplifier
_11Combination with a PIONEER component _
with the _ mark
Wher_ the _3\a_/er ts combined w_th a component capab\e
o_
centralized control of PIONEER products carwing the _ mark
(optional AV surround amplifier, etc.), it is possible to control
the entire system.
Using a resistorless cord with mini-plugs (without load) on
both ends that is available in audio stores, connect the CON-
TROL IN jack of the player to the CONTROL OUT jack of the
component.
• For the connection and operation methods, read the oper-
ating instructions of the component to be connected.
• Once the system remote control connection is made, the
remote control sencer of the player wilt not accept the
remote control. The remote control unit should be pointed
at the remote control sensor of the connected compo-
nent. J