Changing The Signal Type - RCA VR354 User Manual

CHANNELS
1 Auto Channel Search
2 Add/remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
5 Cable Box Setup
0 Exit
3. Press 1 to display the AUTO CHANNEL SEARCH menu.
AUTO CHANNEL SEARCH
What type of signal
are you using?
I Cable TV
2 Antenna
3>Detect Automatically
0 Cancel
4. Select one of the three AUTO CHANNEL SEARCH options,
your choice will be marked with an arrow symbol at the left:
• Cable TVsearches for cable stations from a single channel.
• Antenna searches for local broadcast stations on all channels.
• Detect Automatically will make this decision for you
AUTO CHANNEL SEARCH
Detect Automatically
A strong cable or antenna signal in
your area may cause Auto Detect to
mis-detect. If this should happen,
select I or 2 for the system you have.
]
Now scanning channel 14
Press any key to cancel
The VCR begins scanning for the available channels--this takes
about one to two minutes. When the scan is complete, the VCR
tunes to the lowest channel number available. At this point,
pressing CHAN up or down should only select the active channels.
CHANGING THE SIGNAL TYPE
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
3. Press3 to change the Signal Type between CABLE and
ANTENNA.
11