Table of Contents
Advertisement
CHANGING
THE SIGNAL
TYPE
1.
Press MENU to display the VCR MAIN MENU.
2.
Press 4to display the CHANNELS menu.
3.
Press 3 to change the Signal Type between
CABLE and
ANTENNA.
ADDING
OR REMOVING
CHANNELS
You may want to add or remove channels after you Auto
Channel Search, especially if some of the channels have weak
signals or you don't want to watch them.
1.
2.
3.
Press MENU to display the VCR MAIN MENU.
Press 4 to display the CHANNELS menu.
Press 2 to display the ADD/REMOVE CHANNELS screen. Use
the CHAN up or down keys on the remote or number buttons
to go to the channels you want to remove or add.
ADD/REHOVE
CHANNELS
Channel
115
is
presently
ADDED
Press
CLEAR
to
remove
Press
NENU
to
exit
ADD/RENOVE
CHANNELS
Channel
115
is
presently
REMOVED
Press
ZNFO
to
add
Press
RENU
to
exit
4.
When at the channel,
it will be added if not already on the
list or deleted
if it was. If the channel was added, you can
press CLEAR to remove it. If the channel was deleted, you
can press INFO to add.
TIME AND
DATE
The VCR gives you two ways to set the time and date- manually,
and the Auto Clock Feature. The Auto Clock Feature enables the
VCR to update the clock each time the VCR is turned
off. The
Auto Clock is advantageous
because it updates the time for you
automatically.
Before you set the time and date, set the Auto DST (Daylight-
Saving Time) feature to ON or OFF for your area.
Selecting Channels
The Channel up and down buttons
access those channels active in your
VCR channel list,
You can still access channels not
on the channel list by using the
number buttons on the remote
control.
12
Advertisement
Table of Contents
