GE VG4269 User Manual page 46

Troubleshooting Tips (Cont.)
No stereo sound during playback
Check to make sure the TAPE PLAYBACK feature is set to EIl_l to
hear stereo sound during playback. The tape you are playing must
be recorded in stereo in order to use the Hi-Fi feature.
Must use the AUDIO/VIDEO OUT jacks on the back of the VCR to
hear stereo sound.
Must be hooked to a component capable of playing stereo sound,
Stereo audio too
noisy
Stereo signal is weak. Set audio reception to [] only.
Adjust the tracking by pressing the Channel up or down buttons
(A T) to minimize the noise.
44