Otr Recording - GE VG4269 User Manual

Recording Features
There are three ways to record programs:
Recording- pressing one button to start recording a
program (see VCR Basics section).
OTR Recording- starts recording a program already being
watched, and automatically stops the recording after
a designated period of time.
13mer Recording-- automatically starts and stops a
recording at a predetermined time and date.
OTR Recording
Use OTR recording when you want to quickly record the
remaining portion of the program you are watching.
I,
Set the tape speed to SP or EP by pressing the SpoEp button
on the remote control. The current speed is reflected on-
screen (if you have this option selected by using the INFO
button on the remote control), and on the VCR front panel.
2. Press the REC button (REC/OTR buttons on the remote
control) to begin recording.
3. Repeatedly press the REC/OTR buttons on the remote to set
end time of the recording.
OTR 12:30 • IEP 36
(Screen shown is just an example)
Each time you press the REC/OTR button, you increase the
recording time to the next half-hour (up to 4 hours total). While
the VCR is in this recording mode, the front panel display will
blink the time that the VCR is scheduled to shut off.
The VCR continues to record and then automatically turns off at
the time you select.
To stop an OTR recording, press the STOP button on the remote
control (STOP/EJECT on the front panel).
OTR Recording
OTR recording is a great way to
tape the last quarter of the game,
or the last pert of a movie when
you have to leave.
2O