Playing Back Audio Only; Copying And Editing Tapes - GE VG4269 User Manual

Playing
Back Audio
Only
To get stereo sound, connect the AUDIO OUT jacks on the back
of the VCR to the appropriate input on your amplifier or receiver.
Do not use the phono input. Refer to your amplifier or receiver
user's guide.
Using Two VCRs for Copying and
Editing Tapes
Use one VCR as the playback VCR and the other as the
recording VCR.
1. Connect the VCRs using the diagram at the right.
2. Turn on both VCRs and "IV.
.
Tune the TV to the VCR viewing channel (either 3, 4, or TV's
video input). (See, "How to Find Your VCR's Video Input
Signal," in the References section of this manual for more
information).
4. If you are using coaxial cables for the connection, tune
recording VCRto channel 3 or 4--the one selected on the
playback VCR.
If you are using audio/video cables, select the line input on
the recording VCR.
5. Insert the tape you want to copy into playback VCR. Insert a
blank tape with its safety tab in place into recording VCR.
6. Using visual search, locate the segment you want to copy on
the playback VCR. Pause the tape at this location.
7. Press RECORD on the recording VCR, then PAUSE.
8. Press PAUSE on both VCRs to begin copying.
9. Press PAUSE on both VCRs to stop copying.
10. Repeat steps 6-9 to copy or edit additional segments.
Caution:
The unauthorized recording of
satellite broadcasts, television
programs, or other copyrighted
materials may infringe on the rights
of others,
Two VCR Connection
CABLE BOX
ORANTENN_
pLAYBACK VGR
RECORDING VCR
NOTE: Thisis an
example of two
possible VCRs. You
may have different
models that do not
look the same.
m
4- OR--k
TO TV TO TV
24