Table of Contents
Advertisement
m &lU#l_m,llffJ
Copying
and Editing
Tapes
Operating
instructions
(Refer
to hookup
on page 27.)
Caution: The unauthorized
recording of television
programs
and other
materials may infringe the
rights of others.
Use another VCR or camcorder as the playback VCR and
the TV/VCR as the recording VCR.
1. Turn on the VCR or camcorder and the TV/VCR.
2. Press INPUT once to select VIDEO1 (back panel jacks) or
press INPUT twice to select VIDEO2 (front panel jacks).
3. Insert the tape you want to copy into the playback VCR
or camcorder. Insert a blank tape with safety tab intact
into the TV/VCtL
4.
Start the playback VCR or camcorder playing.
If the
tape was not recorded on the playback VCR, streaks
may appear and you may need to adjust the tracking.
When you reach the place you want to begin copying,
place the playback VCR or camcorder in play pause.
5. Press REG, then PAUSE, on the TV/VCR's
remote.
6. Press PAUSE on both the VCR or camcorder' and the
TV/VCR's
remote at the same time to begin copying
the tape.
7.
Edit out segments
that you do not want to copy by
pressing
PAUSE on the TV/VCR's
remote to stop
copying the tape. Then, locate the next segment you
want to copy on the playback VCR or camcorder by
using FF, REW, or PLAY. Press PAUSE on the playback
VCR or camcorder. Press PAUSE at the same time on
both the VCR or camcorder and the TV/VCR's
remote
to resume copying.
.
Press STOP on both the VCR or camcorder and the
TV/VCR's
remote when you are finished.
Remember to press INPUT on the TV/VCR's remote for
normal TV viewing
on the TV/VCR.
VIDE01
22
Advertisement
Table of Contents
