Table of Contents
Advertisement
_$W_I_ImNUP"
Using the Playback
Features
Automatic
Tracking
The TV/VCR has automatic tracking which adjusts the
picture when playing a tape that was recorded on
another VCR. Automatic tracking is turned on
whenever
a tape is inserted or the TV/VCR's
power is
turned on.
Manual
Tracking
Occasionally,
you may need to manually adjust
tracking
on a tape recorded on a different VCR or
camcorder.
Tracking is used when playing a tape.
It
has no effect during recording.
• When streaks or snow appear in the picture during
normal playback or slow motion, press TRACKING
up or down on the remote or CHANNEL up or down
on the TV/VCR for the best possible picture.
• To turn automatic tracking
back on, press and hold
both of the CHANNEl
buttons on the front of the
TV/VCR.
Time
Counter
The time counter helps locate the beginning
or end of
programs you taped.
The time counter automatically
resets to 0:00:00 whenever
a tape is inserted, or you
can press CLEAR when the time counter is displayed.
For example, if a 30-minute program was recorded at
the beginning
of the tape and you wanted to record
another
program after it, you would:
1. Insertthe prerecorded tape.
0:00:00
2.
Press DISPLAYtwice to display the time counter
and fast forward the tape until 31 minutes appears
on the screen. Then you can begin recording a
second program.
Commercial
Scan
This is useful for skipping commercials
or short
program segments.
Press SEARCH during playback to advance the tape
approximately
60 seconds.
13
Advertisement
Table of Contents
