Table of Contents
Advertisement
TV + DVD
I.
2.
.
.
+ VCR
Connect
your
DVD Player
to your
TV.
A. Conncc't
the audio
(white
and red) c'ablc:s to the CMP1 L and R audio
input
jacks
on the back of the TV and to the
audio
output
jacks on the DVD player.
B. Connect
three
video
grade
cables
to the CMP1 Y PI_ PI_ jacks
on the back of the TV and to the Y PI_ P_ jacks
on the
DVD player.
Notes:
If your DVD player does not have Y PBPRjacks, but does have an S-Video jack, connect the player to the VID1 S-VIDEO
jack on the TV using an S-Video cable.
If your DVD player does not have an S-Video jack, connect the player to the VID1 V (Video)jack
on the back of the TV
using a video cable.
Important:
If you use the VlD1 S-VIDEO or V (Video)jack
to connect your TV to the DVD player, you must connect the
audio cables to the VID1 L/MONO and Rjacks on the TV.
Connect
your VCR to your
TV.
A. Connect
a coaxial
cabk_ to the VCR's antenna
output
jack and to the ANTENNA/CAI_LE
ANALOG
INPUT jack on the TK.
B. Connect
the audio
(white
and red) cables
to the VID2 L/MONO
and R audio
input
jacks on the back of the TV and
to the audio
output
jacks on the VCR.
C. Connect
the video
cable
to the VID2 V (Video)
jack on the back of the TV an(] to the video
output
jack on the VCR.
Make
sure
cable
or antenna
is connected
to your
VCR.
Connect
the coaxial
cable from
your cable outlet
or antenna
to the antenna
input
jack on the VCR.
Connect
the coaxial
cable
from
an off-air
antenna
to the ANTENNA
DIGITAL
INPUT
jack.
Note: Do not connect a digital
cable signal to this input.
To review other
connections,
go to the
next page.
If you are done
connecting
devices
to
your
TV, go to page
16 to
complete
the Initial
Setup.
If you want more details
of the jacks on your TV, go
Chapter
I
11
Advertisement
Table of Contents
