Tv + Hd Receiver + Vcr + Dvd Player - RCA D52W15 User Manual

Connections & Setup

TV + HD Receiver + VCR + DVD Player

1. Make sure cable or antenna and/or satellite is connected to your VCR.
A. Connect the coaxial cable from your cable outlet or antenna to the antenna input on the HD Receiver.
B. Connect the satellite dish antenna to the satellite input on the HD Receiver.
2. Connect your HD Receiver to your TV.
A. Connect the audio (white and red) cables to the CMP1 L/MONO and R audio jacks on the back of the TV and to the Audio Output jacks on the
HD Receiver.
B. Connect three video grade cables to the CMP1 Y, P
Notes: The Y, P , P jacks are sending the digital cable signal to the TV.
B R
If your HD Receiver has a DVI output, connect the HD Receiver to your TV using a DVI cable. Make sure to connect the left and right audio cables to the DVI L/MONO and R jacks
on the TV.
3. Connect your HD Receiver to your VCR.
A. Connect a coaxial cable to the HD Receiver's antenna output and to VCR's antenna input.
B. Connect the audio (white and red) cables to the Audio Output jacks on the HD Receiver and to the Audio Input jacks on the VCR.
C. Connect the video cable to the Video Output jack on the HD Receiver and to the Video Input jack on the VCR.
4. Connect your VCR to your TV.
A. Connect a coaxial cable to the VCR's antenna output and to the ANTENNA/CABLE Input jack on the TV.
B. Connect the audio (white and red) cables to the VID2 L/MONO and R audio jacks on the back of the TV and to the Audio Output jacks on the
VCR.
C. Connect the video cable to the VID2 V (video) jack on the back of the TV and to the Video Output jack on the VCR.
5. Connect your DVD player to your TV.
A. Connect the audio (white and red) cables to the CMP2 L/MONO and R audio jacks on the back of the TV and to the Audio Output jacks on the
DVD player.
B. Connect three video grade cables to the CMP2 Y, P
Notes: If your DVD player doesn't have Y, P
If your DVD player doesn't have an S-Video jack, connect the player to the TV's VID1 V (video) jack using a video cable.
Important: If you use the TV's VID1 S-VIDEO or V (video) jack to connect the DVD player, you must connect the audio cables to the TV's VID1 L/MONO and R jacks.
6
CABLE
O
R
1A
HD RECEIVER
S-VIDEO VIDEO
ANT OUT
ANT IN
SAT IN
1B
Satellite Receiver
3A
, P jacks on the back of the TV and to the Y, P
B R
, P jacks on the back of the TV and to the Y, P
B R
, P jacks, but does have an S-Video jack, connect the player to the TV's VID1 S-VIDEO jack using an S-Video cable.
B R
Graphics contained within this publication are for representation only.
OFF-AIR ANTENNA
Y P B P R L R
AUDIO
L
R
Y P P L R
B R
2A
2B
3B
P P L/ R
Y B R MONO
L/
MONO
DVI-HDTV
R
Y P B P R L/ MONO R
COMPONENT INPUTS
COMPOSITE INPUTS
3C
V L/ MONO R
ANTENNA/
CABLE
L/
V MONO R
4C
VCR VIDEO L AUDIO R
4B
IN
OUT
L R
AUDIO
VIDEO
ANTENNA IN ANTENNA OUT
AUDIO OUT
P
L R Y B
R
5A
5B
TV
EXT/INT
+ +
RIGHT LEFT
EXTERNAL SPEAKERS
AUDIO/VIDEO OUTPUT
FIXED AUDIO
V L R
VARIABLE
AUDIO
SUBWOOFER L R
4A
, P jacks on the HD Receiver.
B R
, P jacks on the DVD player.
B R
DVD PLAYER
P
R
S-VIDEO
Go to page 12
Chapter 1