THINGS
TO KNOW
BEFORE
CONN ECTING
COMPON
ENTS
PROTECT
YOUR
COMPONENTS
FROM
POWER
SURGES
•
Connect all components before plugging any power cords
into the wall outlet.
•
Always turn off the TV and other components before you
connect or disconnect any cables.
V
¥
POSITION
CABLES CORRECTLY
TO AVOI
D AU DIO
HUM
OR INTERFERENCE
•
Insert all cable plugs firmly
into their jacks.
•
Place the audio/video
cables to the sides of theTV's
back
panel instead of straight
down the middle
after you
connect
your components.
•
Try not to coil any twin-lead cables and keep them away
from the audio/video cables as much as possible.
•
Make sure all antennas and cables are properly grounded.
Refer to the SafetyTips sheet packed with your unit.
PROTECT
YOUR
COMPONENTS
FROM
OVE RH EATI NG
•
Do not block ventilation
holes in any of the components.
Arrange
the components
so that air can circulate
freely.
•
Do not stack components.
•
Allow
adequate
ventilation
when placing your
components
in a stand.
•
Place an amplifier
or satellite
receiver
on the top shelf of
the stand so heated air rising
from it will not flow around
other
components.
V
V
V
CONNECTIONS
31