Table of Contents
Advertisement
ZERO
SEARCH
The zero search feature enables the VCR to quickly return to a
counter reading of 0:00:00 anywhere on the tape. This is
especially convenient when you want to repeat a segment of the
tape several times.
1.
Go to the beginning
of the program you wish to return to.
2.
Press INFO twice
to display the timer counter on the TV
screen.
3.
Press CLEAR to reset the counter to 0:00:00.
4.
Continue
playing the tape.
5.
Press STOR
6.
Press SEARCH on the remote twice
to display the ZERO
SEARCH menu.
7.
Press REV to return to 0:00:00 on the tape.
ZERO
SEARCH
Current
tape
counter
2:17:25
Press
REV
to
go
to
0:00:00
Press
SEARCH
to
exit
ZERO SEARCH
Searching for
0:00:00...
PressSTOPto cancel
is
TIME
COUNTER
The time counter shows the actual time it takes to record a
program
or play back a segment of a recorded tape. It helps
locate the beginning
or end of programs you taped. The time
counter resets to 0:00:00 whenever the tape is ejected from
the VCR.
For example, if you record a 30-minute
program at the beginning
of the tape and you want to go to the end of that program
to
begin another
recording,
you would:
1.
Press INFO twice
to display the time counter.
2.
PressCLEAR to reset the time counter to 0:00:00.
3.
Press FWD to forward
the tape until the time counter reads
0:30:00.
+
.
Press STOR This is the approximate
end of the program.
(You
may want to press PLAY to verify.) Now, you can begin
recording
at this spot.
Press INFO to remove the time counter from the screen and
return to the normal display mode.
Hours
Minutes
0:30:00
I
Seconds
28
Advertisement
Table of Contents
