Advertisement
The
TVs audio/video
input jacks arejbr
NOTE:
Repeatedly
pressing the AV button on the remote control will toggle the
I
dire_tpicture
attd sound connections
picture source from the current channel,
the AVI channel, then the CV1 channel,
between
the TV and a VCR (oi similar devke)
then the AV2 channel, then the SIDE (AV3) channel and the AV4 channel. After the
that has audio/video
output jacks. Follow the
AV4 channel,
the AV button will select the current channel again.
east steps below to connect your accessory
device to the AV l hzput Jacks located on the
back of the T[_
RACKOVTV
2
3
4
5
6
Connect the VIDEO (yellow) cable to
the VIDEO AV1 in jack on the back of
the TV.
Connect
the AUDIO (red and white)
cables to the AUDIO (left and right)
AVI in jacks on the rear of the TV.
Connect the VIDEO (yellow) cable to
the VIDEO OUT jack on the back of
the VCR.
Connect
the AUDIO (red and white)
cables to the AUDIO
(left and right)
OUT jacks on the rear of the VCR.
Turn the VCR (accessory device) and
the TV ON.
Press the AV button
on the remote
control to select the AV1 channel. AVI
will appear in the upper left corner on
the TV screen.
With thc VCR (or accessory
dcvice)
ON and a prerecorded
tape (CD, DVD,
etc.) insertcd,
press the PLAY button
to view the tape on the television.
Ovr
Repeatedly
pressing the AV button on the
remote control will toggle the picture source
from the current channel, then AV1, CV1,
AV2, SIDE (AV3), and the AV4 Input Jack
connections.
AUDH)
IN
(RED/WHITE)
BACK
OF VCR
VCR
(EQUIPPED
WITH
VIDEO
AND
AUDIO
OUTPUT
JACKS)
VIDEO
IN
(YELLOW)
Advertisement
