Advertisement
When
using the TI/ remote control with at
CR, first make certain it is set to con-
t#vl your VCR (by the REMOTE
CODE os
SEARCH
method).
2
Set the TV/VCR/ACC mode switch
to VCR on the remote control.
Point the top of the remote toward
the fi'ont of the VCR (remote sensor
window)
when pressing
the buttons.
VCR System
Switch
Set in the VCR position to send remote coin
mands to the VCR.
Record
Button
Hold the REC(ord!Sap) and PLAY • buttons
down to begin a VCR recording.
Play Button •
Press to begin playback
of a videotape.
Rewind
Button
Press to rewind tapes. For some VCR's,
the
STOP button may have to be pressed first,
then REWIND.
In playback
mode, hold
down the button to view the picture moving
rapidly in reverse.
Stop Button •
Press to stop thc motion of a tape in play-
back, rewind, fast forward,
and so on.
UL HINT
Remember, the VCR buttons on the remote will
not operate your VCR if those l_atures are not
found on your VCR remote control.
NOTE:
All VCR functions (particularly
Search, Rewind, Fast Forward, etc.) will oper-
ate the same as with the original VCR remote
control provided with the VCR.
\
\
®
Power Button
Press to turn the VCR ON and OFF.
TV/VCR
Button
Press while in the VCR mode (the VCR indi
cater on thc front of the unit will light) to view
the playback of a tape. Press again to place in
the TV position (the VCR indicator light will
go off) to view one program while recording
another program.
Number
Buttons
Press buttons for the direct sclection of
VCR channels.
Channel
+ and - Buttons
Press to scan up or down through the VCR
channel numbers.
: Forward Button
Press to rapidly advance the tape. For some
VCRs, you may need to press the STOP
button first, then the FAST FORWARD
button. In playback mode, hold the button
down to view the picture moving rapidly in
the forward direction.
Button
II
Press to temporarily
stop the tape during a
playback
or recording.
Press again to
release Pause.
51
Advertisement
