User Manual Read your User Manual and/or Quick-Use Guide first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance you may access our online help at Model No.: Serial No.:...
Return your Product Registration Card today to get the very most from your purchase. Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once to ensure:...
A. The power supply cord or the plug has been damaged; Note to the Cable TV system installer: This reminder is provided to call the Cable TV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
AUDIO/VIDEO OUT jacks of the Cable Box to the AUDIO/VIDEO IN 2 jacks on the rear of the TV. Press TV/AV/EXIT on the TV’s remote control to set the TV to the VIDEO 2 channel. Change TV channels at the Cable Box.
INPUT If your antenna has a round cable (75 ohm) on the end, then you're ready to connect it to the TV. Go to step 2. If your antenna has flat twin-lead wire (300 ohm), you first need to attach...
TV screen.When you play material on the VCR, DVD Player, etc. that is connected to the AUDIO and VIDEO IN 2 jacks on the rear of the TV, it will appear on the TV on the VIDEO 2 channel.
Press VOL. 8 to increase the sound level. Press VOL. 9 to lower the sound level. Press CH. ; 8 or CH. 9 to select TV channels. Press MENU to see the TV’s on-screen menu. In the menu, use VOL. 8/9 and CH.
STANDBY y y Button Press to turn the TV on or off (standby). You also can turn on the TV by pressing the CH (annel) 8/9 buttons on the front of the TV. SLEEP Button Press to select a time period (10 min-...
TV’s on-screen menu to be in English or Spanish. Press MENU to see the menu. Press VOL + or VOL - to highlight SET. Press CH+ or CH- to highlight LANGUAGE. Press VOL + or VOL - to enter the LANGUAGE menu.
TV to know what type of sig- nal - Cable TV or a normal Antenna - you are using. To tell the TV whether you are using a Cable TV signal, set TV/CABLE to TV or CABLE as follows.
Auto Program (Setting TV Channels) ou can set your TV to receive local TV channels (from an Antenna) or Cable TV channels (when you have Cable TV service). Then, use AUTO PRO- GRAM to set up the channels that are available for you.This makes it easy for you to select only the...
Press VOL + or VOL - to highlight TUN. (tuner). Press CH+ or CH- to highlight TV/CABLE. Press VOL + or VOL - to select TV or CABLE (whichever you have). Details are on page 11. Press CH+ or CH- to highlight CHANNEL.
Press TV/AV/EXIT to remove the menu from the screen. Helpful Hint You cannot select TUN. if the TV is set to VIDEO 1/S- VIDEO,VIDEO 2, or DVD. Press TV/AV/EXIT repeatedly to get to the TV channels. Adding or Erasing Channels PIC.
TV picture, select a channel and follow the steps below. Press MENU to see the menu. Press CH + or CH- to highlight your choice: BRIGHTNESS, COLOR, CON- RAST, SHARPNESS,TINT, or BLUE BACK (background). Press VOL + or VOL - to increase or decrease the element you chose.
TV has automatic picture settings matched for your current program. SmartPicture resets your TV’s video settings for different types of programs and viewing conditions. Each SmartPicture setting is preset at the factory to automatically adjust the TV’s Brightness, Color, Contrast,...
TV’s clock. Press MENU to show the on-screen menu. Press VOL+ or VOL- to highlight SET. Press CH+ or CH- to highlight TIMER. Press VOL+ or VOL- to display the TIMER features. Press CH+ or CH- to highlight CLOCK SET.
TV to a specific channel at a specific time, use the On-Timer. Before you begin, set the clock correctly. Details are on page 17. Press MENU to show the on-screen menu. Press VOL+ or VOL- to highlight SET.
TV at a specific time every day, use the Off-Timer. Before you begin, set the clock correctly. Details are on page 17. Press MENU to show the on-screen menu. Press VOL+ or VOL- to highlight SET.
Captioning (CC) lets you read the voice content of TV programs on the TV screen. Designed to help the hearing impaired, on-screen text boxes will show dialog, conversations, and activity during TV programming. Press MENU to show the on-screen menu.
TV, only to have it wake you up at two in the morning with a test pattern screeching in your ears? Well, your TV can save you that trouble by turning itself off.
ON and MASTER ENABLE is ON. After you set a secret code, you can block up to six ratings in TV Ratings or Movie Ratings.These rat- ings are set by the Motion Pictures Association of America and TV broadcasters.
The code “0000” is the default of the TV. If you have not set up a code previ- ously, then “0000” is the code.You can- not use “0000” after you set your own code (unless you reset the code to “0000”).
Parental Control. One is based on movie industry ratings. The other is based on TV industry ratings. Both can be used to censor programming. Let’s first look at the MPAA Rating options of Parental Control.
Blocking Programming with TV Ratings ome program ratings are based on TV industry ratings as described below. Press MENU to see the menu. Press VOL+ or VOL- repeatedly to highlight SET. Press CH+ or CH- to highlight PARENTAL CONTROL. Press VOL+ or VOL- to see the SECRET CODE screen.
OFF, all blocking/censoring is disabled. BLOCK UNRATED: All unrated pro- grams (based on Movie Ratings or TV Ratings) will be blocked if this feature is ON and MASTER ENABLE is ON. BLOCK NO RATING: All programming...
You can still operate the TV with the remote control.You can still use the POWER button on the front of the TV, but only to turn off the TV (not on). Set CHILD LOCK to OFF to cancel this feature so you can use the buttons on the front of the TV again.
TV has sound settings that match these programming types. Press MENU to show the on-screen menu. Press VOL+ or VOL- to highlight SND (Sound). Press CH+ or CH- to highlight SMART SOUND.
Press VOL+ or VOL- to select SND (Sound). Press CH+ or CH- to highlight BAL- ANCE. Press VOL+ or VOL- to adjust the bal- ance. Press TV/AV/EXIT to remove the menus from the screen. Balance PIC. SND SET TUN. COLOR BRIGHTNESS...
Stereo and Second Audio Program ulti-channel Sound (MTS) broadcasts enhance TV viewing by bringing you programs with high fidelity stereo sound. MTS also provides an extra channel called the Second Audio Program (SAP), which broadcasters can use to transmit a second language or for other purposes.
DVD). Use VIDEO 1/S-VIDEO, VIDEO 2, or DVD to view material on other equipment (Camcorder,VCR, DVD Player, etc.) that is connected to the TV’s Audio and Video In jacks. No Sound • Press the VOL+ and VOL- buttons to adjust the volume.
Normal use of the TV should involve viewing of programs that have constantly moving or changing images. Do not leave non- moving images on screen for extended periods of time. Do not display the same images too frequently;...
(If the product is determined to be defective) LABOR: For a period of ninety (90) days from the date of pur- chase, Philips will repair or replace the product, at its option, at no charge, or pay the labor charges to any Philips authorized repair facility.