Advertisement
T;e
AV4 Input Jacks provide Both Component
nd VGA Video Inputs at 1080i or 4801) fin
accessol 3, like HD Receiver and Digital DVD
Players.
Using the color diffbrence signals (Pb,
Pr) and the luminance (Y) signal will improve
color bandu'idth information.
Connecting a Digital device using the COM-
PONENT VIDEO Inputs:
.,,_
Connect the Component (Y, Pb, Pr)
Video OUT jacks frontthe DVD player
(or similar device) to the (Y, Pb, Pr) AV4
in(put)jacks on the TV.
2
3
4
S
Connect the red and white AUDIO
CABLES to the Audio (left and right)
output jacks on the rear of the accessory
device to the Audio (L and R) AV4
in(put) jacks on the TV.
Turn the TV and the DVD (or digital
accessory device) ON.
Press the AV button on the remote to
tune to the AV4 channel.
Press the PLAY button on the DVD (or
digital accessory device) to view the pro
gram on the television.
Connect an HD Reviver to the VGA Input:
Pleasc ret?r to your Reccivcr's Owner's
Manual
for more detailed hookup options.
If using a Satellite Dish, Cable signal or
Antenna signal, connect the 75_2 round
cable from a Satellite Dish to the SATEL-
LITEIN and/orthe Cable andAntenna
signals to the ANTENNA "A" or "B" 1N
on the back of the HD Receiver.
Connect another 75s_ round cable fi-om
the OUT TO TV jack on the HD Receiver
to the 75f2 IN on the back of the TV.
8
9
Connect a VGA cable from the VGA
OUT on the HD Receiver to the AV4
VGA Input .jack on the back of the TV.
Connect the Audio L(eft) and R(ight)
cables from the AUDIO Outputs on the
HD Receiver to the AV4 AUDIO Inputs
on the back of the TV.
With both the HD Receiver and the tele-
vision ON, Press the AV button
on the
remote to tune to the AV 4 Channel and
view the video input from the VGA sup-
plied signal.
Using the AV4 Component Video Inputs
Note:
If the AV4 channel
is
tuned
and no signal
connt.'CliOll
presenk
the screen
could jmnp
or flash.
AV4
A
®®®
@®®
AV4 In
AUDIO
VIDEO 480Wl 0801
JA(TK PANEL
2 Fh pROGESSIVE
ON BACK
OF TV
JACK
PANEL
OF D[GITAL
DEV[CE
SUCH
AS A DVD
PLAYER
Using the VGA Input and a HD Receiver
Note: This is a very basic hookup, please refer to you HD Receiver's
(or accessory
device's) Owner's Manual
for detailed hookup instructions.
JACK
PANEl
ON BACK
OFTV
When
using tile AV4 chamlcl
(inpuls),
,-x)me cOrtlfOls aild t_atules
will nol [_
accessible
liar adjustmcnl
SllARPNESS.
TINT,
DYNAMIC
CONTRAST,
and the
FORMAT
Conlrols
will not be available¸
JACK
PANEl.
OF HD RECEIVER
WITH
VGA OUT
t0
Advertisement
