Advertisement
Follow
these simple st_Tzv to enter a three-
digit Accessory
Device Code Number that
will allow you to use yore _TV remote to work
the functions
of an accessoly
devi_ e. Please
read ttnvugh
the stq_s once b_fore pelfolwT-
ing them.
Look up a three-digit Accessory
Device Code Number for the accesso-
ry device (found on pages 49-50)
whose functions you want to work
with your TV's remote control.
2
3
4
Press the REC(ord)/SAP button on
the remote control and release.
Press the SOUND button on the
remote within 30 seconds, then release.
Enter the three-digit
Direct-Entry
Code Number
tot your desired device.
The remote is now ready to send com-
mands to the unit.
Point the remote at the remote sensor
window of the device. Then press the
POWER
button on the remote to turn
the unit ON.
NOTE:
If the process just explained
doesn't
work the first time, repeat the same Accessory
Device code number.
If after a second try the TV remote control
does not operate your accessory
device, see if
other three-digit
Accessory
Device Code
Numbers
are shown for your device on the
list pages 4%50 and repeat the steps above
using a new number.
If after repeated
attempts
this method does
not work for you, go to the next page and fol-
low the steps for using the Search method to
set up your remote control.
HELPFUL
HINr
It is recommended
that you use Philips
! brand external accessory
devices with your
Philips television
to insure proper remote
control functions.
If you are using Philips
brand accessory
devices, your remote con-
trol should be ready to use with these
devices.
47
VCR
Satellite
Receiver
Cable Conve_er
PHILIPS
Advertisement
