Connecting With A S-Video (Y/C) Cable - Philips DVDR615 User Manual
Hide thumbs
Also See for DVDR615:
- Service manual (170 pages) ,
- User manual (74 pages) ,
- Technical specifications (2 pages)
Table of Contents
Advertisement
Available languages
Available languages
Connecting
with a S-Video
(Y/C)
cable
This connecting
cable, also known
as the SVHS cable, is used to transmit
the brightness
signal (Y
signal) and color signal (C signal) separately.
This mini DIN
jacldplug
is also called a Hosiden
jack/plug.
Have the following
cables ready:
an antenna cable (I, supplied),
a power
came (2, supplied),
a S-video (SVHS) cable (3), an audio
cable (4, with
red/white
ends).
1
2
Remove the antenna cable plug from
your
TV. Insert
it into
the
ANTENNA
IN jack at the back of the DVD recorder.
Insert
one
end of
the
supplied
antenna
cable
into
the
TV
OUT jack at the back of the DVD
Recorder
and the other
end
into the antenna input jack at the back of the TV.
I
2
3
4
3
Use a S-Video (SVHS) cable and plug one end into the S-VIDEO
(Y/C) OUT jack at the back of the DVD
Recorder
and the other
end into
the S-Video
(SVHS)
In jack of the TV (usually
called
S-Video in or SVHS in. See your TV's instruction manual).
4
Use an audio (cinch)
cable and plug one end into the red/white
cinch jack
AUDIO
L/R OUT at the back of the DVD
Recorder
(next
to
S-VIDEO
(Y/C)
OUT)
and
the
other
into
the
corresponding
red/white
audio input jack of the TV (usually called
Audio
in', 'AV in'. See your TV's instruction
manual).
Switch
on the TV. Then switch the set to the SVHS input jack or
select
the
corresponding
channel
number.
For
the
channel
number, please see your TV's instruction
manual.
6
Connect
the
mains
jack
_MAINS
at the
back
of the
DVD
Recorder
with the power
supply using the supplied
power
cable.
The
most
important
features
of the
DVD
Recorder
will appear
on the display.
After
the initial
installation
is completed,
this function
will
be
switched
off. How you switch
on this function
again, read in the
chapter
'User preferences'
in the section 'Standby'.
Press
STANDBY-ON©on
the
recorder.
'I_
TY n_,:>
L.,'r
will
appear
on the display.
Then,
read the
paragraph
'Initial installation'
in the chapter
'Installing
your
DVD recorder'.
I0 OUT
_.... ] _
MAINS
: "_lug_._
14
Connecting
the DVD Recorder
Advertisement
Chapters
Table of Contents
