Suggested Coffee Measurement Chart; C. A Dding Water And Ground Coffee; Brewing Coffee Now - Mr. Coffee FT series User Manual

Table of Contents

Advertisement

Available languages

Available languages

C. A dding Water and Ground Coffee
1.Open t hebrew basket lid.For y our
convenience,
you can liftoutthe removable
filter b asket.
2.Place aMR. COFFEE
_brand 1 0-12 c up
paper basket-style
filter o raMR. COFFEE
_
permanent
filter i ntothe removable
filter
basket (Figure 5).
NOTE: Ifusing p aper filters, it isimportant
that
the sides ofthe filter f itflush a gainst theside of
the filter b asket. Iffilter c ollapse
occurs, dampen
the filter b efore placing inthe filter b asket and
adding ground coffee a nd water.
3.Add the desired amount ofcoffee a nd
gently shake tolevel the coffee. See the
Suggested
Coffee Measurement
Chart.
FIGURE
5
4. After following
instructions
in the Water Filtration
System, place the MR. COFFEE _
water filter in the basket, making sure that the side marked "this side up"
faces you and that the water filter is level.
5. Be sure the removable filter basket is properly
centered
and all the way down in
the brew basket and close the lid.
6. Fill the decanter with cold, flesh water to the desired capacity (1 cup equals 5 ounces)
For easy and accurate filling, the water markings on the glass decanter and on the
dual water windows
show the amount of water needed to make the
corresponding
desired number of cups. Do not fill past the "12 cup MAX line" or
water will flow out of the overfill hole in the back of the coffeemaker.
The amount of coffee brewed will always be slightly less than the amount of water
poured in the water reservoir. This is due to the minimum absorption
of water by
the coffee grounds.
7. Lift the pour through reservoir lid and pour the water into the water reservoir.
Close the lid and place the empty decanter onto the warmer plate.
NOTE: Make sure the decanter
is fully placed on the warming plate or the water and
the grounds will overflow
from the filter basket. An overflow
may cause personal
injury or damage to property.
CAUTION! To reduce the risk of damaging the decanter
and/or the risk of
personal injury, do not add cold water to the decanter
if the decanter
is
already hot. Allow the decanter
to cool before using.
BREWING COFFEE NOW
1. After completing
the steps in the Adding Water
and Coffee section and with the glass decanter
and the filter basket securely in place, turn the
coffeemaker
on by pressing the SELECTbutton
once. The BREWNOW green light will turn on to
signal that the coffeemaker is on and brewing
(Figure 6).
2. To enjoy a more full flavored cup of coffee, press
the Brew Strength button once. The STRONG Brew
Strength red light will turn on. The coffeemaker
will remain in the Brew Strength you have selected
until you change it back to regular strength by
pressing the Brew Strength button
or until you
unplug the machine (Figure 7).
3. After the used coffee grounds have cooled,
carefully remove the filter basket and discard them.
NOTE: The shower head cover is hot after brewing.
Always allow the coffeemaker
to cool down before
cleaning.
FIGURE 6
FIGURE 7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ft series

Table of Contents