Changing Channels While Using The Pip Modes; The Main Image - Mitsubishi VS-55601 Owner's Manual

changing channels while using the PIP modes
O Press the PIP channel up or
down button (PIP CH) on the
remote control to change the
channel of the PIP image.
O Press the CH,MNNEL up or
down button on the remote
control to change the channel of
the main image.
_>Important:
The PIP CH Buttons change the channel for the small PIP image
under two conditions:
• When that image is a channel from ANT-A
• When the main picture is from an external input (INPUT-l,
INPUT-2, or INPUT-3) and. the PIP is from ANT-A or
ANT-B
when the PIP image comes from another piece of equipment (e.g.,
your satellite receiver, cable box or VCR) the HP CH buttons do
not change the picture.
94 Chapter 4: Using the Special Features