That Have A/V Network - Mitsubishi VS-55601 Owner's Manual

TV + Mitsubishi products that have A/V network
terminals
The A/V Network is a special system that MitsubishJ developed to
make it easier to use several Mitsubishi products with only one
remote control. Only one of the products needs to be in "line of
sight" of the remote control. When the supplied cable is connected
between two Mistubishi products with A/V network, you can point
the remote control at the TV and it will "pass" the remote control
command to the others.
Mitsubishi VCRs that have Active A/V Network carl also have the
benefits of additional automated tasks. See Chapter 4, Using the
Specia] Features, for more information about the Active A/V
Network features.
procedure
O Connect one end of the A/V network cable to the ACTIVE A/V
NETWORK terminal on the back of the TV.
O Connect the other end of the cable to the A!V NETWORK IN
terminal on the back of a Mitsubishi component that has A/V
network terminals.
_>Important: Depending on which components you have and the way you plan to
use your equipment, the method of connecting the ,.aJV network can
change. For more detailed information, review the owner's guide of
each particular Mitsubishi component.
MitsubishiComponentrearterminals
TV rear terminals
CABLE
ANT-A LOOP-OUT ANT -B
@@@
ACTIVE AN LP, JG
NETWORK UNK
®
37