Selecting The Source Of The Pip Image - Mitsubishi VS-55601 Owner's Manual

selecting the source of the PIP image
_>Important:
The Mitsubishi TV you have purchased has two-tuner PIP. If you
have only an ANT-A input connected, you can view one program on
the main picture and another channel from tile same ANT il_put on
the PIP display without the use of a second external tuner, ,inch as
a VCR.
If you have a cable box on ANT-A, you will not be able to have both
the PIP and main pictures from ANT-A. The main picture must be
ANT-B and the PIP picture ANT-A (cable box).
®G®
O Turn the PIP image on by
pressing the PIP button.
To select the PIP input, press
the PIP INPUT button. Each
time you press the button, the
PIP input will select "she next
input from the inputs available:
• ANT-A, INPUT 1, INPUT 2
or INPUT 3
You ,can select ANT-B in
PIP, only when the main
input is fi'om INPUT 1,
INPUT 2 or INPUT 3.
Each time you select a different
input, an on-screen display will
appear for about fiw; seconds.
The screen will disp::ay the
name of the input selecte&
Ant A 023
ESPN
PiP A023
You can also select the PIP
input source by first selecting
the source in the main picture
and then pressing the ENTER/
EXCH button. Pressi:ng this
button with the PIF displayed
exchanges the PIP picture for
the main picture.
DImportant: If you have a picture displayed from ANT-B on the main picture,
and the PIP source from ANT-A, the ENTER/EXCH b_.tton will not
exchange the main picture for the PIP picture.
Using the Picture-in-Picture (PIP) Modes 93