Selecting The Source Of The Pip Image - Mitsubishi VS-50800 Owner's Manual

selecting the source of the PIP image

If you have only an ANT-A input connected, you can view one program on the
main picture and another channel from the same ANT input on the PIP
display without the use of a second external tuner, such as a VCR.
If you have ANT-A and ANT-B connected, you can view ANT B in the main
picture and ANT A in the PIP input. Each time you select a different PIP
input, an on-screen display will appear for about five seconds. The screen
will display the name of the input selected.
⁄Important: If you have a cable box on ANT-A, you will not be able to have
different pictures when both the PIP and main pictures are from
ANT-A.
Antenna A KABC 7
Stereo SAP
⁄Important: If the main picture is an HD signal from DTV, a PIP or POP cannot
be displayed. With HDTV a message "NO PIP display with HDTV"
will appear onscreen.
Using the Picture-in-Picture (PIP) Modes
VCR DVD/CABLE
POWER
TV AUDIO
CHANNEL
1 2 3
4 5 6
7 8 9 VOLUME
SQV 0 RCL
PIP
INPUT MUTE
CANCEL INFO
ADJUST
SUB
ENTER
EXCH
GUIDE HOME
MENU
PIP CH
AUDIO VIDEO PIP
SLEEP FORMAT PIP INPUT
REC STOP PAUSE
VCR PLUS+
REW/REV FF/FWD
PLAY
PIP INPUT 1
† Turn the PIP image on by
pressing the PIP key.
¢ To select the PIP input, press
the PIP INPUT key. Each time
you press the key, the PIP input
will select the next input from
the inputs available.
83