Windows Xp, 2000 Professional, And Me; Macintosh - Konica Minolta Konica DIMAGE X1 Instruction Manual

DISCONNECTING THE CAMERA FROM A COMPUTER
Never disconnect the camera when the indicator lamp is lit - the data or memory card may
permanently be damaged.
Windows 98 / 98 Second Edition
Confirm that the indicator lamp is not lit. Turn the camera off, remove it from the cradle, and then
disconnect the USB cable. If Kodak EasyShare is installed, right click on the EasyShare icon located
on the task bar and quit the application before disconnecting the camera.
Windows XP, 2000 Professional, and Me
To disconnect the camera, click once on the unplug-or-eject-hardware icon located
on the task bar. A small window opens indicating the device to be stopped.
Click on the small window to stop the
device; the safe-to-remove-hardware
message appears. Turn the camera off,
remove it from the cradle, and then
disconnect the USB cable.
When more than one external device is connected to the
computer, repeat the procedure above except right click on
R_cyd_ B_n the unplug-or-eject-hardware icon to open the unplug-or-
........ eject-hardware window.
rl e,,,,*_,
The hardware devices connected to the system are displayed.
Click the display-device-components check box. Highlight the
device to be stopped by clicking on it then click "Stop."
A confirmation screen appears to indicate the devices to be
stopped. Clicking "OK" stops the device.
The safe-to-remove-hardware message appears. Turn the
camera off, remove it from the cradle, and then disconnect
the USB cable.
Macintosh
Confirm that the indicator lamp is not lit and then drag the mass-
storage device icon and drop it into the trash. Turn the camera off,
remove it from the cradle, and then disconnect the USB cable.
©