Maytag MVWX5SPAW0 Use And Care Manual page 9

8, Select cycle modifiers
0 caliente
0 tibia 0 sucio 0 alto
0 semi fffa 0 medio 0 bajo
0 fr[a 0 ligero 0 sin exprimir
ajuste de ciclo
Once you select a cycle, the default settings for that cycle will be
lit. Press the cycle modifiers buttons to change the Temperatura
(Temperature), Suciedad (Soil Level), and Exprimido (Spin Speed),
if desired.
NOTE: Always read and follow fabric care labels instructions to
avoid damage to your garments.
Semi Fria (Cool)
Fria (Cold)
Warm water may be added to Dark colors that
assist in soil removal and to help bleed or fade
dissolve detergents. Light soils
1 0. Press INICIO/PAUSA/
DESBLOQUEAR TAPA (Start/
Pause/Unlock) to begin cycle
inicio
D
ausa
desb_queartapa
Press the INICIO/PAUSNDESBLOQUEAR TAPA (Start/Pause/
Unlock) button to start the wash cycle. Filling is delayed for
several minutes while load balance is sensed. When the cycle
has finished, the FIN (Done) indicator will light up. Promptly
remove garments after cycle has completed to avoid odor,
reduce wrinkling, and rusting of metal hooks, zippers, and snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press INICIO/PAUSNDESBLOQUEAR TAPA (Start/Pause/Unlock);
the lid will unlock once the washer movement has stopped. This
may take several minutes if the load was spinning at high speed.
Then close lid and press INICIO/PAUSNDESBLOQUEAR TAPA
(Start/Pause/Unlock) again to restart the cycle.
If lid is left open for more than 10 minutes the water will
pump out.
Delay in water fill
Filling is delayed for 2 to 3 minutes to check for load unbalance.
You will hear the hum of the spin prior to filling. This is normal
operation.
9, Select cycle options
o o
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as Extra enjuague (Extra Rinse). These can be
turned off, if desired.
NOTE: Not all options are available with all cycles.
9