Advertisement
Available languages
Available languages
2,
3,
Remove power
plug and yellow
strap from machine
base to release the rear leveling
system.
/
Firmly grasp the power cord
and pull to completely
remove
the power
cord,
cord
restraint,
and pin from the rear panel.
Confirm
that the power
cord restraint
(A), and pin (B) are removed.
Looped
power
cord
Looped power cord
Firmly grasp the yellow
shipping
strap and pull until both ends are completely
removed
from washer.
4,
A
B
A. Power cord restraint
B. Pin
fb remove
the power
cord from the cord restraint,
push the power cord
in, press TAB, and
then pull the power cord out.
2.
Check that two (2) cotter
pins were removed
with
the shipping
strap.
8
Advertisement
