Maytag MVWC450XW1 Use And Care Manual page 9

7. Select wash temperature
temperature
all c0[d rinses
cold
9. Press START/Pause/Unlock to begin
wash cycle
Once you select a cycle, select the desire wash temperature by
turning the Temperature knob to the desired setting.
Always read and follow fabric care [abe[ instructions to avoid
damage to your garments.
iii H ot
Some cold water is added to save
ii
energy. This will be cooler than
Warm
Some cold water will be added, so
this will be cooler than what your
Whites and pastels
Durable garments
Bright colors
Moderate to light soils
Cool
Warm water is added to assist in
Colors that bleed
Cold
iiiWarm water may be added to assist Dark colors that
in soil removal and to help dissolve b eed or fade
detergents. Light soils
Press the START/Pause/Unlock button to start the wash cycle.
When the cycle has finished, the DONE indicator will light.
Promptly remove garments after cycle has completed to avoid
odor, reduce wrinkling, and rusting of metal hooks, zippers,
and snaps.
Unlocking the lld to add garments:
If you needto open the lid to add 1 or 2 missed garments:
Press START/Pause/Unlock; the lid will unlock once the washer
movement has stopped. This may take several minutes if the
load was spinning at high speed. Then close lid and press
START/Pause/Unlock again to restart the cycle.
If lid is [eft open for more than 10 minutes the water will pump
out automatically.
8. Select cycle options, if desired
deepdean extrarinse
off on off on
If you would like to add a Deep Clean and/or Extra Rinse
option, turn the knob for that feature to ON.