Philips 30PW862H Directions For Use Manual page 80

Three Audio/Video (Monitor) Output jacks can be used for
cording a selected TV (Antenna Input/tuner signal source)
Channel. This recording can even be completed while viewing
another external Audio/Video Source Select option. (For example:
DVD program playback shown through the A/V 1 or 2 Input
source comwction.)
NOTE: Refer to page 4 for the proper hookup of an accessory
device to the AV 1 IN(put) jacks. Follow the instructions on how
to tune to the AV 1 channel to view a DVD program playback or
pre-recorded VCR tape.
The following steps allow you to connect a VCR to record a
selected TV channel program through the Monitor Outputs,
Connect one end of the yellow Video Cable to the
Monitor Out VIDEO plug. Connect the other end to the
VIDEO IN plug on the VCR,
Connect one end of the red and white Audio cable from
the Monitor Out AUDIO L and R plugs on the TV to the
AUDIO IN plugs on the VCR.
3
Tune the TV to the program channel you wish to record
by pressing the AV or NUMBERED buttons.
Note: Once selected be sure to leave the TV channel tuned
to the desired program until the complete recording is fin-
ished,
Turn the recording VCR ON, insert a blank VHS tape
and it's ready to record the channel program you selected
previously in step #3.
®
®®®
®®®
Recording
VCR
rHD17 FHD2
Located or] tile
_11 back of the TV
®'®
VIDEO 2Fh
L _ IN
aOp/lOmi I
MONITOR
OUT
VIDEO & AV4_ _ AVS
AUDIO L(ef0 and R(ighl)
VIDEO CABLE
(Yellow)
AV I Sample DVD
(accessory device
Hookup h'om Page 4)
Thae Audio Output jacks are great /br connecting to an external
udio system or a set of external speakers. This will enhance
the sound coming from the television to improve your viewing and
listening e_werience.
For Audio System Connection:
Connect one end of the R(ight) and L(eft) Audio Cables
(red and white) to the AUDIO OUT (Left and Right) jacks
on the television.
Connect the other ends of the R(ight) and L(eft) Audio
Cables (red and white) to the Audio Left and Right Input
jacks on the external Audio System.
Turn the Audio System and the TV on. Adjust the vol-
ume coming from the Audio System to a pleasant listening
level.
You can now adjust the sound level coming from the audio
system by pressing the VOLUME (+) or (-) button on
the TV or remote control.
®
MB, W
14tr_
®®®
®®®
®®®
rHDI_ FHD2
®-
DM
VIDEO 2_
LAV4_ L AV5 _ 480p11080 ]
IN
JACK PANEL
Located l)n tile
back of tile TV
AUDIO CABLES
(Red & White)
EXTERNAL
AUDIO SYSTEM