Philips 30PW862H Directions For Use Manual page 79
Hide thumbs
Also See for 30PW862H:
- Quick use and setup manual (8 pages) ,
- Directions for use manual (108 pages) ,
- Specifications (2 pages)
Advertisement
If
using an accessory
device
that is not high definition
but uses
omponent
Video jacks. The AVI jacks on the TV offer the user
the possibility
of better video reproduction
using the Component
Video Inputs.
The color difference
signals (Pb, Pr) and the lumi-
nance (Y) signal
are connected
and received
separately,
which
allows fi)r improved
color bandwidth
#_brmation
(not possible
when using composite
video or S-Video
connections).
!
Connect the Component
(Y, Pb, Pr) Video OUT jacks
from the DVD player (or similar device) to the (Y, Pb, Pr)
IN(put) jacks on the TV. When using the Component Video
Inputs, it is best not to connect a signal to the AVI Video
Input.
Connect the yellow VIDEO CABLE along with the red
and white AUDIO CABLES to the AUDIO (left and
right) OUT(put) jacks on the rear of the accessory device
to the AVI VIDEO and AUDIO IN(put) jacks on the TV,
Press the AV button on the remote control repeatedly to
tune to the CVI channel.
Turn the TV and the DVD (or digital accessory device)
ON.
Insert a DVD disc into the DVD player and press the
PLAY 11_button on the DVD Player (or digital accesso-
ry device).
,vvL
The description
for the component
video connectors
may differ
depending
on the DVD player or accessory
digital
source
equipment
used (for example,
Y, Pb, Pr; Y, B-Y, R-Y; Y, Cr,
Cb).
Ahhough
abbreviations
and terms may vary, the letters b
and r stand for the blue and red color component
signal con-
nectors,
and Y indicates
the luminance
signal.
Refer lo your
DVD or digital
accessory
owner's
manual
for definitions
and
connection
details.
CVI
®
@®00
ME'ttt
Mtr_
(9@@
®®®
rHD17 FHD2
I
ACCESSORY
DEVICE
EQUIPPED
WITH
COMPONENT
VIDEO
OUTPUTS.
BACKOFTV
T_e
S(uper)-Video
connection
on the rear of the TV can provide
ou with better picture detail and clarity for the playback
of
accessory
sources
such as DBS (digital
broadcast
satellite),
DVD
(digital
video discs), video games, and S-VHS
VCR (video cas-
sette recorder)
tapes than the normal antenna
picture connec-
tions.
NOTE:
The accessory
device must have an S-VIDEO
OUT(put)
jack in order/br
you to complete
the connection
on this page.
Connect
the S-VIDEO
CABLE
to the S-VIDEO
input jack
on the rear of the television.
Connect the AUDIO (red and white) cables to the AUDIO
AV2 IN jacks on the rear of the TV.
Connect the S-VIDEO CABLE to the S-VIDEO
OUT(put) jack on the accessory device,
Connect the red and white AUDIO cables to the AUDIO
(left and right) OUT(put) jacks on the rear of the accessory
device,
Press the AV button
on the remote control repeatedly
to
tune the AV2 channel,
The S-Video
Input is dominate
over
the AV2 Video Input.
Turn the VCR, DVDor other accessory device ON.
With the VCR (or accessory
device)
ON and a prerecorded
tape inserted,
press the PLAY button
to view the tape on
the television.
The S-Video jack and the AV 2 jacks work together. When a
device is connected
to the S-Video jack, do not connect a signal to
the AV 2 IN Video jack. This could cause an over-lapping
of two
video images on the TV screen.
AV2
®®®
®®®
AUDIO
CABLES
(Red
& White)
rHDI7 FHD2
M
JACK
PANEL
ON BACK
OF TV
VIDEO 2Fh ]
AV4 _
r5 _
480p/1080i
IN
IN
r0UT]
VNI_
VIDEO _
_
VIDEO
O.VIDEO
D®
T
sVIDEO
CABLE
,__L
Video Jack. This could cause a ghosl
image
Io appear
over
the S-Video
signal.
@
VIDEO
AUDIO
OUT
OUT
OUT
VCRIIrEXTERNAL
ACCESSORY
DEVICE
WITH
S-VIDEO
OUTPUT
7
Advertisement
