Philips 30PW862H Directions For Use Manual page 65

y;ur Cable TV input into your home may be a single (75
hm) cable or a converter box installation. In either
case, the connection to the TV is very easy. Follow the steps
below to connect your cable signal to your new television.
If your cable signal comes directly from a round 75f2 coaxial
cable use the following steps:
Connect the open end of the round Cable Company
supplied cable to the 75f2 input on the TV. Screw it down
finger tight,
Plug the television into the wall outlet and turn the TV
on. Refer to the AUTOPROGRAM feature to program all
the available channels on your cable signal,
Direct Cable
Connection:
Cable signal coming from
Cable Company (Round
75f2 coaxial cable)
Jack Panel
Back of TV
rHD17 FHD2
B_IIDE0
AC Power
Wal[Outlet
Power Plug
from back of TV
If your cable signal comes from a cable box, use the following
steps: (This connection will be mono. Some Cable boxes use
Left and Right channel audio output jacks for stereo connec-
tions. This type of Cable Box can he connected to the AV1 or
AV2 Audio Left and Right Audio Inputs. Please refer to your
Cable Box instructions.)
Connect the open end of the round Cable Company
supplied cable to the cable signal IN(put) plug on the back
of the Cable Box,
3
4
Using a separate round coaxial cable, connect one end to
the OUT(put) plug on the back of the Cable Box.
Connect the other end of the round coaxial cable to the
75f2 input on the back of the television. Screw it down fin-
ger tight.
Plug the television into the wall outlet and turn the TV
on. Refer lo the TUNER and AUTOPROGRAM features
on page 4 of 1his Quick Use Guide. TUNER should be set
to the CABLE option. AUTOPROGRAM can be set to
program all the available channels on your cable signal
into 1he television's memory.
This connection will supply Stereo sound to the TV.
Cable Box Connection:
INPUT OUTPUT
i Round 75f_
Coaxial Cable
Cable Signal IN from
the Cable Company
The signal coming
from the box will
be MONO.
rHDt7 r HD2 1
ol ,a kpanel
Back of TV
@M © 'ViOE*2_
Jack Panel Back
of Cable Box
Cable Box
Power Cord
AC Power
Wall Outlet
Power Plug
from back of TV
A
Connect the open end of the round Cable Company sup-
plied cable to the cable signal IN(put) plug on the back of
the Cable Box.
Using a RCA type Video Cable, connect one end of the
cable to the Video (or ANT, your cable box may be labeled
differently) Out jack on the cable box and the other end to
the AVI Video Input on the TV.
Using a RCA type Audio Left and Right Cable, connect
one end to the left and right Audio Out L & R jacks on
the cable box. Connect the other end to the AVI Audio L
& R Input jacks on the TV.
NOTE: Use the AV button on the TV remote control to tune to 1he
AVI channel for the cable box signal. Once tuned, change chan-
nels at the cable box, not the television. Pressing the AV button
repeatedly will scroll all the AV Input channels, including the
presently tuned channel.
Cable Signal IN
from the Cable
Company
Video Cable-
(Yellow)
L&R
iRed, White)
Jack Panel Back of TV
A combination antenna receives normal broadcast chan-
nels (VHF 2-13 and UHF 14-69). Your connection is
easy because there is only one 75Q (ohm) antenna plug on
the back of your TV, and that's where the antenna goes.
!
If your antenna has a round cable (75 ohm) on the end,
then you're ready lo connect it to the TV.
If your antenna has flat, twin-lead wire (300 ohm), you
first need to attach the antenna wires to the screws on a
300- lo 75-ohm adapter.
Push the round end of the adapter (or antenna) onto the
75Q (ohm) plug on the back of the TV. If the round end of
the antenna wire is threaded, screw it down finger tight.
3
Plug the television into the wall outlet and turn the TV
on, Refer lo the TUNER and AUTOPROGRAM features on
page 4 of this Quick Use Gukle. TUNER should be set to the
ANTENNA option. AUTOPROGRAM can be set to program
all the available channels on your cable signal into the televi-
sion's memory,
Antenna Connection:
Outdoor or Indoor Antenna
(Combination VHFAJHF)
The combination antenna receives normal
broadcast channels 2-13 (VHF) and 14-69 (UHF).
Round 75Q Coaxial
Cable from Antenna t ..... I
Jack Panel, Back of TV
rHO17 FHD2
J L J
AC Power
Wall Outlet
Power Plug
from back
of TV