Pentax K-R Operating Manual page 67

8
0
Press the four-way controller (•).
The frame moves to the month.
Use the four-way controller (• •)
to set the month.
Set the day and year in the same manner.
Next, set the time.
If you select [12h] in Step 4, the camera
switches between am and pm depending
on the time.
_ate Adjustment
Date Format mm/dd/yy 241
Time 00:00
Settings complete
Press the fou r-way controller (•)
to select [Settings complete].
_ustment
Date Format mm/dd/yy 241
Date 09/09/2010
Time O0:00
/0
Press the
OK
button.
The camera returns to the status screen and is ready to take a picture.
If you set the date and time from the menu, the screen will return to the
['_ Set-up 1] menu. In this case, press the MENU button.
Pressing the MENU button while setting the date and time cancels the settings
made up to that point and switches the camera to Capture mode. After initia
settings are complete, if the camera power is turned off before the date and
time settings are complete, the [Date Adjustment] screen will appear first next
time you turn the camera on. In this case. you can also set the date and time
from the menu later (p.270)
• When you press the OK button in Step 10. the seconds value is set to O. To
set the exact time. press the OK button when the time signal (on the TV.
radio, etc.) reaches O seconds.
• You can change the language and date and time settings from the menu
(p.270, p.273)