Pentax K-R Operating Manual page 65

When the Wrong Language is Set
If you mistakenly select the wrong language in the [Language/_]
screen and proceed to the [Date Adjustment] screen, you can perform
the following operation to set the language back.
If you have proceeded to switch the camera to Capture mode (and the
camera is ready to take a picture), perform the following operation from
Step 2 to set the language back.
7 Press the
MENU
button once to
display the guides on the monitor.
The screen shown on the right is an
example of the guides displayed. The
displayed screen will vary depending on
the selected language.
The guides appear on the monitor for 3
seconds.
2 Press the
MENU
button once.
[1_ 1] is displayed in the upper tab.
SON is displayed when the mode dial is set to SON.
Press the four-way controller (•) five times.
[_ 1] is displayed in the upper tab.
Press the four-way controller ( 1_ ) six times when the mode dial is set to
SON
Press the four-way controller (•) to select [Language/_]_].
Press the four-way controller (•).
The [Language/_;;_] screen appears.
#_ Use the four-way controller (• • _1 • ) to select the
desired language and press the OK button.
The [& Set-up 1] menu in the selected language appears.
Refer to the following pages and set the desired city for [Hometown]
and the current date and time as necessary.
• To change the hometown: "Setting the World Time" (p.270)
• To change the date and time: "Changing the Date and Time Display"
(p.270)
_i_i'_iiYiiiiiiiiiii_ii!iiiDiiiiiil
when the hometown and the date and time are not Set, the [Initial Setting]
screen or[Date Adjustment] screen wil! be disPlaYed again next time the
camera is turned Qn.
If you have not proceeded to the [Date Adjustment] screen, you can reselect
a language using the four-way controller (I_)in the [Languagei_] screenl
iiiiiiiiiiiiiiii
iiiiiiiiiiiiiiii