Pentax K-R Operating Manual page 53

4
Close the battery cover.
The DC coupler's connection cable is
pulled out from the battery cover.
Connect the DC terminals on the AC adapter and the DC
coupler with the • marks aligned.
/
iiiiiiiii!i!
!i_!i!i!i!i!i!
8 Connect the AC plug cord to the AC adapter.
7 Plug the AC cord into the power outlet.
• Make sure the camera is turned off before connecting or disconnectin£ the
AC adapter.
• Make sure connections are secure between the terminals. SD Memory Card
or data may be corrupted if disconnected while the card is being accessed.
• The connection cable will protrude from the battery cover while the AC
adapter is in use. Be careful as you will not be able to set the camera upright
on a table, etc.
Be sure to read the manual of the AC adapter kit K-AC109 when using the AC
adapter.