Panasonic Omnivision PV-DF2002 Operating Instructions Manual page 19

Connections you'll need to make
Recording (Editing) unit
Playing (Source) VCR
R-AUDIO-LVIDEO
2
Insert pre-
recorded tape.
Insert blank tape
with record tab.
• Dubbing tapes protected
with Copy Guard will have
poor qualityresults.
Select "LINE" mode.
See "Selecting Input Mode" below.
Press PLAY then
PAUSE at starting
point to put in
Standby mode.
Press REC, then
Ec S__UPAUSE' Press STILL/PAUSE
_) _ immediately to put in
Standby mode.
-- (Perform operation of steps 4 and 5 on both units at same time.)--
, Press PLAY
to start dubbing.
_ILL_PAUSE
Press STILL!PAUSE
to start dubbing.
PressSTOP Press STOP
i
• Unauthorized exchanging and/or
copyingof copyrighted recordings
may be copyright infringement.
• Please note that some tapes
cannot be dubbed on this unit.
Also, it is not possible to dub
DVD/Video CD/CD to VHS tape
using this unit.
I_ktkod 1 :
Press CH &_'. The displaywill change as follows.
Method
2: _LINE 1_,_125(CABLE)or (TV)6_)9_
s Press ACTION forMAIN MENU
b Press &V<I • to select "TW, then press SET
for SET UP "rv screen.
c Pre_s AV to select"INPUT SELECT," and
then press SET to select "TUNER," "LINE 1" or "LINE 2."
d Press ACnON twice to exit thismode
19