Panasonic Omnivision PV-DF2002 Operating Instructions Manual page 15

If AUTO CLOCK SET was incomplete, manually
set the clock as follows.
Press ACTION on the Remote to
display SET CLOCK Menu screen.
2
Press • • to selectthe month
and press SET set. In the same
manner, selectand set the date,
year, time, and DST. (Daylight
SavingTime)
Press ACTION twice to start
CLOCK and exit.
When nx)vingunitto a new IocalJon, o r ifa
mistakewas ma_ in the initialSetupsectino.
• Makesurea tapeis notinsertedin the unit.
' 1
1
Turn the unit
Power on.
Press and hold bothPLAY and
FF on the unitfor more than 5
seconds.
• The powerwill shutoff.
• Please ignore"NO CASSETTE"warning.
3
Do"Initial Setup"on page 14.
Note to CABLE System Installer
This reminderisprovidedto callthe
CABLE (Cable"IV) System Installers
attentionto Article 820-40 of the NEC
that providesguidelinesfor proper
groundingand, in particular,specifies
that the cable groundshallbe
connectedto the groundingsystemof
the building,as closeto the pointof
cable entry as practical,
15