Panasonic Omnivision PV-V4611 Operating Instructions Manual page 9

Press CHA Key to start Channel/Clock
Auto Set operation. Settings are
performed automatically. If the setup is
completed, the following screen is
displayed.
[_ CLOCK _/
5/13/2001 SUN 21:20PMI/
SE_ING CH 1(3
AUTO CLOCK SET
If "Auto Clock Set is Incomplete"
screen appears, set the clock using
MANUAL CLOCK SET procedure
shown below.
If Auto Clock Set was incomplete, manually
set the clock as follows.
m
(23(2:)(33"
t_[_lBtT
(_D (Z) (33)
POWER
-- VCR
VCRFFV
SELECT/
SET
• :PLAY
• :STOP
• :PEW
• :FF
-- ACTION
CHAIr
Press ACTION Key on the Remote to display CLOCK Menu screen.
Press •• to select the month and •
to set. In the same manner, select and
set the date, year, time, and DST
(daylight saving time).
Use when moving VCR to new
location, or if a mistake was made in
the Initial Setup section.
• Make sure a tape is not inserted in
the VCR.
- "
/
1 Turn VCR
Power on.
3
SETCOMPLETED
SET :_ •
START :ACTION
Press ACTION Key twice to start
CLOCK and exit.
Press and hold both
r_
PLAY and CHANNEL
• on the VCR for
more than 5 seconds.
• The power shuts off.
Do "Initial Setup" on page 8.
9