Select Connection - Panasonic Omnivision PV-V4611 Operating Instructions Manual

(_ Connect the OUT Jack on your cable box to the IN FROM
ANT. terminal on the VCR with an RF cable.
(_) Connect the OUT TO TV terminal on the rear of VCR to the ANT.
IN terminal on TV using the RF Cable (included accessory).
TV
VCR
IN FROM ANT. Cable TV
Converter Box
VHF/UHF
®
IN from
(_ANT./CABLE
Press VCR* button for VCR
3
mode. Turn the TV on and set it
to channel 3.
TurnVCRon.
When VCR is turned on for the first
time, SELECT LANGUAGE screen
appears.
I SELECT LANGUAGE
PRESS CH • : ENGLISH
PRIMIR CH • : ESPANOL
PP VCRfTV : FRAN_AIS
T_3 CHANGE VCR'S OUTPUT
H, PRESS ACTION KEY
• If screen does not appear, check
connection between VCR and TV
and, if TV is tuned to channel 3, try
switching it to channel 4.
• When you want to change the output
channel of VCR, please refer to VCR's
Output Channel on page 13.
• If wrong language is set, do "Reset All
VCR Memory Functions" steps on
page 9.
Press CH• to select English.
or
Press CHV to select Spanish.
or
Press VCRFFV key to select French.
When one of the above keys is
pressed, SELECT CONNECTION
screen is displayed in the selected
language.
/I VCR I CLOCK
SELECT CONNECTION
VCR TV
/_VCRI, CABLE/DSS ROX_'TV
SELECT:• • SET : I-
Press •• to select "CABLE/DSS
BOXI_VCR•TV" connection and
press•to set.
- WARNING
When using "Nut type" RF coaxial cables, tighten with fingers
only. Overtightening may damage terminals.
vcr_cR CLFCLOCK _
SELECT CONNECTION
CABLEI DSS BOXIPVCRI*TV
CABLE/OSS BOX OUTPUT CP
SELECT:A • SET "
EXIT :ACTION
10