Panasonic Omnivision PV-V4611 Operating Instructions Manual page 8

(_ Connect the Cable from Antenna/Cable to the IN FROM ANT.
terminal on VCR.
(_ Connect the OUT TO TV terminal on the rear of VCR to the ANT.
IN terminal on TV using the RF Cable (included accessory).
VCR IN FROM ANT.
TV
from
NT./CABLE
VHF/UHF
Press VCR* button for VCR
mode. Turn the TV on and set it 3
to channel 3.
Turn VCR on.
When VCR is turned on for the
first time, SELECT LANGUAGE
screen appears.
II SELECT LANGUAGE
PRESS CH • : ENGLISH
PRIMIR CH • : ESPANOL
PP VCR/TV : FRANCAIS
TO CHANGE VCR'S OUTPUT
_PRESS ACTION KEY
• If screen does not appear, check
connection between VCR and TV
and, if TV is tuned to channel 3, try
switching it to channel 4.
• When you want to change the output
channel of VCR, please refer to VCR's
Output Channel on page 13.
• If wrong language is set, do "Reset All
VCR Memory Functions" steps on
page 9.
Press CH• to select English.
or
Press CHV to select Spanish.
or
Press VCR/TV key to select French.
When one of the above keys is pressed,
SELECT CONNECTION screen is
displayed in the selected language.
SELECT CONNECTION
n,m_.i
CABLE / DSS BOX I,VCR,TV
VCR,CABLE/DSS BOX,TV
SELECT:& • SET:,
EXIT :ACTION
Press • • to select connection
and press • to set.
CHANNEL/CLOCK AUTO SET
screen appears.
WARNING ,,
When using "Nut type RF coaxial cables, tighten with fingers
only. Overtightening may damage terminals.
vcF_c_ CL[ CLO_
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX, TUNE IT TO YOUR
LOCAL PES CH THEN
PLEASE PRESS CH UP KEY
8