Panasonic Omnivision PV-V4611 Operating Instructions Manual page 15

VCR/
TV
PAUSE/
SLOW
REC
S
_ECT L_T
O@®
QQ®
/
-- STOP
-- SPEED
CH •
CH •
f
Record using VCR controls
1
Insert a tape.
2
Select
Channel I VCR/TV
.u, iFunc, on / |
4
Press REC 5 Press STOP/
to start EJECT to
Recording. stop.
\ /
This video recorder, equipped with HQ
(High Quality) system, is compatible
with existing VHS equipment. Only use
tapes with the _ mark. Only tapes
tested and inspected for use in 2, 4, 6,
and 8 hour machines are
recommended.
I_Ready Check List
[] All connections are made (pg. 8, 10, 22).
[] TV and VCR are plugged in.
[] TV is on and tuned to CH3, 4, or VIDEO.
[] Remote is in VCR mode. (Press VCR)
Insert tape with rec. tab (pg. 4).
• VCR power comes on.
"VCR" lights on Multi Function Display.
Press CH AV, or number keys
to select channel.
• For "LINE" input, see pg. 28.
• For channels over 100, press 100 key then
press the remaining 2 digits.
Press SPEED
to select record speed (pg. 4).
SP = Standard Play LP = Long Play
SLP -- Super Long Play
•
Speed appears on-screen andonMulti F unction Display.
Press REC
_o start record.
To edit out unwanted scenes, press PAUSE/
__
SLOW to pause, and
again
to
resume
recording_
Press STOP
• ,# to stop record.
• One Touch Recording (record in progress),
VCR shuts off after preset record length.
--> each press of REC adds 30 min. to
record length up to 4 hours.
• Record one station, watch another,
--> press VCR/TV ("VCR" goes out on Multi
Function Display),
--> select channels at TV (recording
continues).
• Watching
one channel
and
recording another is NOT
possible when using a Cable
Box or a Satellite Receiver,
• Select channels at VCR,
• Other channels cannot be viewed during
recording.
--> press VCR/TV ("VCR" lights on Multi
Function Display),
--> select channels at VCR.
O • After 5 rain. in Pause mode, VCR stops to
protect tape and video head.
15