One Touch Recording - Panasonic Omnivision PVQ-V200 Operating Instructions Manual

_IP Check list before you begin.
[] Allconnectionsare made,
[] TV is turnedon andtuned to CH3, 4 or Video,
[] Cassettewith recordtab in place.
[] Remote in VCR mode,
Insert a cassette"
• VCR power comes on and "VCR"
Recordtab_--- I appears on display.
2
c::_cz:__::_ z_
or !
€_) GE)
Select Channel.
PressCH •/V* or NUMBERED keys.
• To select "LINE", see page 11.
• To selectchannelsover 100,
first press 100 key, then enter
remainingtwo digits.
3
i
PAUSE
J SLOW
-3
SPEED
-4
REC
4
• After the VCR has been in Pause mode
for 5 minutes, it will stop automatically
to protect the tape and the video head.
This video recorder, equipped with the HQ (High ]
Quality) System, is compatible with existing VHS
equipment. Only use those tapes with the _ /
mark, It is recommended that only cassette tapes /
that have been tested and inspected for use in 2, /
4, 6, and 8 hour VCR machines be used. J
SPEED
0
Select Recording speed.
(See page 24.)
Press SPEED.
• SP = Standard Play
LP = Long Play
SLP = Super Long Play
• Selected speed is displayed
On mv
screen.
Start Recording.
REC Press REC.
(_ oTo edit out unwanted portions,
press PAUSE/SLOW to pause
and resume recording.
==To stop -> Press STOP.
• One Touch Recording
Press REC repeatedly to set the recording length (30
rain, - 4 hours).
• The VCR turnsitselfoffat a presettime.
• Record One Program While Watching Another
Press VCR/TV--> "VCR" disappears on VCR disptay
--> Select Channel at the TV,
• Selecting Channel at the VCR (Youcannot view
another channel during recording.)
Press VCR/TV--> "VCR" appears on VCR display
--> Select Channel at the VCR (applies to connection b)
only. (See page 4)
You can operate on the VCR
4
Start
1
Insert
2
Select
Record_g. VCIR/TV I a cassette./Channel.
•
Press to stop.
9