Panasonic Omnivision PVQ-V200 Operating Instructions Manual page 24

Use when moving VCR to new location, or if a mistake
was made in the One Time VCR Setup section.
• Make sure a tape is not inserted in the VCR.
'll
1
Turn VCR
Power on.
Press and hold both PLAY
and CHANNEL • on the VCR
for more than 5 seconds.
• The power will shut off,
3
Do "one Time VCR Setup" steps on page 6.
VCR auto adjusts clock for DST. (Page 7.)
Break off the tab.
Record Tab
Screw driver
To record again
Cover the hole
with cellophane tape.
Spring (First Sunday in April)
DST:ON --> sets clock ahead one hour.
Autumn (Last Sunday in October)
DST:ON --> Turns clock back one hour.
• If your area does not observe Daylight Saving
Time, select DST:OFF.
• Keep these time changes in mind when
programming the VCR for timer recordings.
Only use tapes with the _ mark in this unit.
Tape Speed Type of Video Cassette
Setting T160
SP 2 Hours
(Standard Play) 40 Minutes
LP 5Hours
(Long Play) 20Minutes
SLP
(Super Long Play)
T60 [ T120
1 Hour 2 Hours
2 Hours 4 Hours
3 Hours 6 Hours
8 Hours
:24