Panasonic Omnivision PVQ-V200 Operating Instructions Manual page 5

Between ANT, and VCR
f
• Case 1: Twin Lead Cable Only
To VCR Terminal
From Antenna
_
300-75 ohm
(Flat) Twin Lead Transformer
300 Ohm Cable (not supplied)
• Case 2: Twin Lead & Coaxial Cables
UHFNHF Band Mixer
(not supplied)
coaxial Cable
To VCR Terminal
• Case 3: Two Twin Lead Cables
UHFNHF Band Mixer
(not supplied)
300-75 ohm
Transformer
(not supplied)
To VCR Terminal
• If your TV has both post and plug-type
VHF terminals, the post connection is
recommended to minimize signal loss.
J
FCC Warning: Any unauthorized changes or modifications
o his equipment would void the user's authonty to operate. I
Between VCR and "IV
• Case 1: Screw & Plug Type Terminal
UHFNHF Band _ TV
Separator
VHF
RF Coaxial Cable
• Case 2: Screw Type Terminal
TV
75-300 ohm
Transformer
(not supplied)
-VHF
• Case 3: Double Screw Type Terminal
UHFNHF Band TV
Separator
(not s._
VHF
• Case 4: Complex TV Terminal
TERMINALS ON BACK OF TV SET
Split out _
ANT, ---_ _,_ ,I _(_(__
ANT2
• Connect to one of the ANT terminals and
select the same antenna number on the TV.
5