Panasonic Omnivision PVQ-V200 Operating Instructions Manual page 11

Connections you'll need to make.
IN FROM ANT.
(_)
AUDIO
: • O (_ VRFlU.F
VIDEO OUTTOTV
iN1
Playing (Source) VCR
IN FROM ANT.
@
; AUDIO
O VHF/UHF
...... VIDEO OUTTOTV
OUT
Recording (Editing) VCR
AUDIOIN
VHF/ 0
UHF VIDEOIN
@ o
TV for Monitoring
1
Insert pre-recorded
tape.
t
2
%
Insert blank tape
with record tab.
Select LINE mode.
Press INPUT•
(See "Selecting the
Input Mode" below.)
3l andP }
Put in Standby mode. REC PAUSE
Press PLAY, then (_ and (_
PAUSE/SLOW at starting SLOW
point.
Put in Standby mode.
Press REC, then
PAUSE/SLOW
immediately.
Start dubbing.
Press PLAY•
PAUSE
C?
SLOW
Start dubbing.
Press PAUSE/SLOW.
Stop dubbing.
Press STOP.
Stop dubbing.
Press STOP•
• To Monitor Dubbing on Your TV
1 Turn your TV on and tune to the Recording
VCR channel (CH3 or CH4).
2 Set the VCR/"IV Selector on the Recording
VCR tO "VCR."
Dubbing tapes protected with Copy Guard will have
poor quality results.
• Selecting the Input Mode
Method 1:Press INPUT.
Channel Number <--> LINE
Method 2:Press CH ,I/V•
Display will change as below.
(CABLE) (TV)')_
LINE,_-.----_125 or 69,_-j
• "L" lights in Multi-Function Display (about 4 sec.)
when LiNE is selected,
_Caution:
Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement,_
]!