The Time And Status Display; Operating The Washer - LG WM0742HGA User's Manual & Installation Instructions

Steam washer
Hide thumbs Also See for WM0742HGA:
Table of Contents

Advertisement

Available languages

Available languages

0
@
@
THE TiME AND STATUS DISPLAY
The time and status dispHay shows the cycHe progress and estimated time remaining, cycle
options, and other status messages for your washer.
@
ESTUMATED TUME REMAUNUNG
When the cycHe seHector knob is pressed, the
washer automatically
detects the wash Hoad
(weight) and optimizes the washing time, based
on the selected cycHe and options. The dispHay
will then indicate the estimated time remaining
for the seHected wash cycHe.
NOTE: The cycHe time dispHayed may appear
much Mongerthan that of a topqoading
washer.
The dispHayed time is for the compHete cyclic,
rather than just the agitation portion of the cycle,
as is typically shown on a topqoading
washer.
DOOR LOCK UNDUCATOR
Indicates that the door is locked. The washer
door will lock while the washer is operating.
The door can be unlocked by pressing the cycle
selector knob to stop the washer.
NOTE: If the temperature
in the washer is too
high, the door cannot be unlocked until the
washer has cooled. If the water level is too high,
select the DRAIN & SPIN cycle to drain excess
water. Do not try to force open the door.
CYCLE COMPLETUON
UNDUCATOR
Shows how much of the current wash cycle has
been completed.
OPERATING THE WASHER
Once you have loaded the washer and added
laundry products (detergent, bleach, and/or
fabric softener):
Press the ON/OFF button to turn on the
washer. The lights around the cycle
selector knob will illuminate.
Turn the cycle selector knob to the desired
cycle. The display will show the
preset Rinse/Wash Temperature,
Spin Speed, Soil Level, and
Option settings for that cycle.
_j)
If you would like to change the settings
for that cycle, press the appropriate cycle
settings button(s) until the indicator light for
the desired setting is Hit.
@
NOTE: To protect your garments, not every
wash/rinse temperature,
spin speed, soil
level, or option is available with every cycle.
Select any additional cycle options, such
as PRE-WASH, STAIN CYCLE, STEAM, EXTRA
RINSE, RINSE + SPIN, or DELAY WASH, by
pressing the button for that option.
@
@
Press the cycle selector knob to begin
the cycle. The door wiHIlatch,
the display wiIHchange, and
the washer will calcuHate the
estimated time remaining. Once
the washer has calculated the estimated
total cycle time, the washer will start.
To pause the cycle at any time, press the
cycle selector knob
NOTE: The cycle time displayed may
appear much longer than that of a top-
loading washer. The displayed time is for the
complete cycle, rather than just the agitation
portion of the cycle, as is typically shown on
a top-loading
washer.
NOTE: If the temperature
in the washer is
too high, the door cannot be unlocked until
the washer has cooled. If the water Hevelis
too high, select the DRAIN & SPIN cycle to
drain excess water. Do not try to force the
door open.
Washing time can be reduced significantly
for small or lightly soiled loads by selecting
the Speed Wash cycle and setting the Soil
Level button to Light.
When the load is finished, the beeper (if set)
will sound and the door will unlock.
Remove damp clothes from the washer
immediately. Check under the door seal
for small items.
NOTE: To protect your garments, not every
wash/rinse temperature,
spin speed, soil
level, or option is available with every cycle.
20
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wm0742h series

Table of Contents