Olympus FE-280 Instruction Manual page 48

.{3
(#
E
o
o
>.,
o
o
Co
40 EN
Monitor indication Possibte cause Corrective action
E_ There is a problem with the This card cannot be used. Insert a new card.
card.
CARD ERROR
Writing to the card is The recorded image has been protected
E_ prohibited. (read-only) on a computer. Download the
WRITE PROTECT tmage to a computer and cancel the read-
only setting.
The internal memory has no insert a card or erase unwanted data. Before
available memory and erasing, backup the data of important
MEMORY FULL cannot store any new data. pictures using the card, or download such
3ictures to a computer.
E_ The card has no available Replace the card or erase unwanted data.
memory and cannot store Before erasing, download important pictures
CARD FULL any new data. to a computer.
_'"'I There are no pictures in the The internal memory or the card contains no
',----J internal memory or on the 3ictures.
NO PICTURE card. Record pictures.
There is a problem with the Use image processing software to view the
_--_ selected and it 3icture If that cannot be
picture
on a computer.
PICTURE ERROR cannot be played back on done, the image file is damaged.
this camera.
_--_ Pictures taken by other Use image processing software to edit the
THE _MAGE cameras or previously 3ictures.
CANNOT BE edited or corrected pictures
EDITED cannot be edited or fixed.
The battery/card Close the battery/card compartment cover.
compartment cover is open.
CARD-COVER
OPEN
ir---] The battery is empty. Charge the battery.
BATTERY EMPTY
The data in the card cannot
be read. Or, the card is not
formatted.
There is an error in the
internal memory.
• Select [xD CARD CLEAN], and press _.o_).
Remove the card and wipe the contact
area with a soft dry cloth.
• Select [FORMAT] • [YES] and press (_.
All data on the card is erased.
Select [MEMORY FORMAT] • [YES] and
press _. All data in the internal memory is
erased.
[_X The camera is not Disconnect the camera and connect it again
connected to the computer correctly.
NO CONNECTION or the printer correctly.
4_ There is no paper in the Load some paper into the printer.
printer.
NO PAPER
The printer has run out of Replace the ink cartridge in the printer.
ink.
NO iNK