LG LTC22350ST Owner's Manual page 15

• Following illustration, flip the Middle Hinge Bracket (Flange
will now be on top) and position on left side of refrigerator
and re-attach with two bolts and a Phillips screw. (Fig. 32).
• Place refrigerator door down over pin on bottom hinge,
(Fig. 32).
• Place washer be_een refrigerator door and middle hinge
and re-attach Hinge Pin to Hinge Bracket with 1/4-in.socket
wrench.
NOTE: Bracket has been flipped, but Hinge Pin stays in the
same orientation with its hexagonal end facing upward.
* Tighten bolts. Force*fit Top Hinge Cover over Top
Hinge.
* Replace cover from left side of refrigerator top
onto the right of top to cover the holes. Cover is also
force-fitted
* Place Decorative Screw into outer hole on right side
of housing.
, Attach cover on the right side. Cover is force-fitted
After changing d_rs, make sure that the corners of
the Door Gaskets are not folded over. To ensure a
good seal, apply a small amount of silicon grease on
the corners of gaskets.
REATTACHING FRE_ER DOOR
* Put freezer door down over the Hinge Pin on the Middle
Hinge Pin Bracket
• Place Upper Hinge's Pin in the top of freezer door and
line up the Upper Hinge with holes in top of refrigerator.
Use the 3 bolts to replace Hinge.
Fig. 35
15